Bonomi North America 8P0080LF-3/4 250NLF 2-Way Direct Mount Ball Valve Package, 3/4 in Nominal, FNPT End Style, Brass Body, Full Port, EPDM/FKM/PTFE Softgoods, Import

The 8P0080LF series feature the 250NLF lead free, forged brass, full port, ISO direct mount ball valve with a TEA plated ball and stem. The 250NLF also features O-ring back energized seats for touch sealing both up and downstream. In addition, there is a double O-ring stem seal for high cyclic conditions. This series is a low torque design. The Valbia pneumatic actuator comes with a hard-anodized aluminum body, and powder coated end caps. In addition, all Valbia pneumatic actuators are standardly furnished with elevated temperature seals to 302 deg F. The patented side loaded limit stops never enter the piston chamber eliminating extra possible leak paths.

Bonomi North America Ball Valve Package, 2-Way Direct Mount, Series: 250NLF, 3/4 in Nominal, FNPT, 600 psi WOG, -4 to 366 deg F, Full Port, Media: Steam, 1.26 in Orifice, Double Acting Pneumatic Actuator, Brass Ball, 2.99 in Inlet to Outlet Length, 3.94 in Top to Inlet Center, Brass Body, Brass/PTFE Trim, EPDM/FKM/PTFE, 4.33 in L x 1.77 in W x 4.72 in H, Import

• ISO 5211 pad with square stem
• Low torque design with back up O-ring seats
• Double O-ring stem seal design for extended cycle life
• 100% electronically tested in the open and closed position at 80 psi
• PTFE ball seat/thrust washer/stem seal
• Brass stem
• EPDM/FKM O-ring

• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Bonomi_8P0080LF1_Specification_Sheet.pdf
• Warranty Information https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Bonomi_110102_Warranty.pdf