3M™ 7000045520 Flammable Remover, 16 oz Container Tube Container, Liquid/Paste Form, Light Tan, Sweet Odor/Scent

3M™ tape and residue remover lets you efficiently remove tape and tape residue left during the collision repair panel masking process. The remover is very easy to use: simply spread it over the residue, wait and wipe off. It cleanly removes residue as well as entire polyurethane protective tapes, neoprene rubber and more. No scraping is required, so painted surfaces stay scratch-free. 3M™ tape and residue remover reduces the effort to remove tape and residue remove tape and tape residue without scraping in applications such as collision repair where removing tape and tape residue is essential, our 3M™ tape and residue remover helps you deliver excellent results and high customer satisfaction with less effort and expense. This paste type remover simply spreads over tape and tape residue and then wipes off, greatly reducing the need for scraping or scrubbing painted surfaces. This is invaluable for auto body panels, when rework is particularly costly and time consuming. The dwell time for residue removal can be as little as one minute, leaving finished auto body panels and other surfaces clean and scratch-free. The remover can also be used to remove polyurethane protective tapes and for the removal of neoprene rubber tapes. Simply apply, wait for the tape to separate, remove the tape and clean the surface with a damp cloth. 3M™ tape and residue remover reduces the effort required to remove stubborn tape and residue and also the time needed to repair scratched panels after scraping and scrubbing. Operators no longer have to accept the time consuming hassle of cleaning up the tape and residue left after common masking procedures. Our 3M™ tape and residue remover gives them that time back for better results and better business. It's an excellent example of how 3M™ applies science to improve the lives of collision repair professionals.

3M™, 7000045520, Remover, Flammable, 16 oz Container, Tube Container, Liquid/Paste Form, Light Tan, Sweet Odor/Scent, 9.5 lb/gal Specific Gravity, 678 g/L VOC, 8.1 to 8.7 pH, Composition: Dimethyl Adipate, Polyethylene Glycol, Dimethyl Glutarate, Stearic Acid, Talc, 201 deg F Flash Point

• Water based formulation provides safer working environment for personnel
• May cause paint softening, not recommended on plastic or acrylics
• Compatible with your substrate prior to use
• Use of rags for removal eliminates the need for scrapers and reduces the risk of injury or equipment damage
• No need to scrub painted panels, preserving finished surfaces and saving rework
• Can loosen tape residue quickly
• Easy to use - just spread on and wipe off
• Efficiently removes tape and residue after masking

• SDS https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/3M_051131_35975_SDS.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/3M_051131_35975_Specification_Sheet.pdf