3M™ 7010493391 695DM Wheel, 5 in Dia x 1-3/4 in THK, 2 in Hole, D320 Grit, Diamond Abrasive

The 3M™ diamond wheel 695DM is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best form retention and the fastest cut rate when used with oil based lubricants. These resin bonded diamond wheels are designed for high performance grinding on carbide. The 3M™ diamond wheel 695DM line is specifically designed for the production and sharpening of cutting tools, including end work, gashing and cutting primary and secondary relief edges. Primary relief involves removing material directly behind the cutting edge to enhance chip clearance. For secondary relief, as light bevel is ground next to the primary relief. End work grinds a small relief angle on the tip of the tool, while gashing adds a slot along the cutting face to allow for chip flow. Each of these processes require the highest level of quality that our 3M™ diamond wheel 695PM provides. High quality bonding these super abrasive wheels also use a resin bonding which are specially designed to resist thermal and chemical deterioration, which can occur during high speed grinding. This u rated bond is very hard and excellent for precision work on tool metals like carbide. This also allows for faster cuts and a higher cut rate. Used in wet grinding applications with high volume flood coolant systems, this bonding material is used with oil based lubricants for lower grinding temperatures. The right wheels for the job 3M™ provides a broad portfolio of super abrasive wheels used for your round tool relief and clearance angle applications. They feature a variety of metal cores, including aluminum, steel, composite and copper and can be cut with custom arbor holes to fit customer specifications. From short runs and re-sharpening to "lights-out" and long production runs, 3M™ has the wheel design to meet your needs.

3M™, 7010493391, Wheel, Series: 695DM, 5 in Wheel Diameter, 1-3/4 in Wheel, 2 in Center Hole, D320 Grit, Diamond Abrasive, 2200 to 3400 sfpm Fluting, 4500 to 6500 sfpm Gashing, 4500 to 5500 sfpm OD and End Work Maximum, Resin Bond, Applicable Materials: Carbide, Non-Ferrous Metals, PCD, Cermet's and Polycrystalline CBN/Diamond (PCBN), Wheel Type Number: 11V9

• Designed to provide free cutting form and the fastest cut rate
• Arbor holes are made to customer specifications