Apollo™ LD14108BE10A 11367
  1. pin-int

Apollo™ Apollo International™ LD14108BE10A Resilient Seated Lug Style Butterfly Valve, 8 in Nominal, Flanged End Style, 125/150 lb, Ductile Iron Body, EPDM Softgoods

Apollo™ Apollo International™ LD14108BE10A Resilient Seated Lug Style Butterfly Valve, 8 in Nominal, Flanged End Style, 125/150 lb, Ductile Iron Body, EPDM Softgoods

  • Manufacturer: Apollo Conbraco
  • Brand Name: Apollo™
  • Part#: 11367
  • MPN: LD14108BE10A
  • UPC: 670750940163
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading
  • Branch Availability

Apollo International™ LD141 series ductile iron butterfly valves are ideal for use in industrial and commercial/HVAC/mechanical applications. The LD141 series is a companion lug style.

Apollo™ Apollo™ Apollo International™ Butterfly Valve, Resilient Seated Lug Style, Series: LD141, 8 in Nominal, Flanged End Style, 125/150 lb Pressure Class, -20 to 250 deg F Intermittent/225 deg F Continuous, Bare Shaft Actuator, 10-1/4 in Top to Inlet Center, Ductile Iron Body, Aluminum Bronze Disc, EPDM Softgoods

Actuator Type      :      Bare Shaft
Body Material      :      Ductile Iron
Disc Material      :      Aluminum Bronze
End Style      :      Flanged
Nominal Size      :      8 in
Pressure Class      :      125/150 lb
Series      :      LD141
Softgoods Material      :      EPDM
Temperature Rating      :      -20 to 250 deg F Intermittent/225 deg F Continuous
Top to Inlet Center      :      10-1/4 in
Type      :      Resilient Seated Lug Style
  • Compatible with ANSI 125 lb and 150 lb flanges
  • ISO 5211 top plate allows choice of Apollo™ pneumatic actuators and gear operators
  • LD141 series Suitable for end of line service (bidirectional dead end service) to rated pressure (2 to 24 in)
  • 3 to 24 in meet performance requirements of AWWA C-504
  • The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average
  • ASTM A276 type 416 stainless steel standard shaft
  • Buna-N stem seal and glass reinforced epoxy resin bushing
  • Black EPDM seat
  • Valves are full lug with tapped lugs, to ANSI 125/150 drilling
  • The face-to-face dimensions were designed to comply with MSS SP-67 and API 609
  • Through shaft assures positive disc positioning and dependable performance
  • Weather seal shaft equipped with weather seal to prevent external media from entering the shaft bore
  • Square shaft-to-disc connection provides a robust shaft-to-disc connection without pins or bolts
  • Three bushings supports shaft at three locations to enhance shaft alignment and absorb actuator side thrusts
  • Factory tested to 110% of full rated pressure in both directions before shipping
  • Profiled disc design precision machined disc edge creates Bubble tight shut-off, primary seal
  • Shaft seal the shaft Dia is greater than the Dia of the seat's shaft hole creating a robust shaft seal
  • All valves are 100% factory tested before shipping
  • pdfSpecification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Apollo_LD14102BN12A_Specification_Sheet.pdf