Dixon® 2-Bolt Clamp, Series: Boss™, 3/4 in Inside Dia, 1-10/64 to 1-20/64 in Outside Dia, 2-31/32 in Length, 2-9/16 in Width, 9/16 in Hex Bolt, 21 ft lb, Iron Band, Zinc Plated
Band Material |
: |
Iron |
Bolt Size |
: |
9/16 in Hex |
Finish |
: |
Zinc Plated |
Inside Diameter |
: |
3/4 in |
Length |
: |
2-31/32 in |
Outside Diameter |
: |
1-10/64 to 1-20/64 in |
Series |
: |
Boss™ |
Torque Rating |
: |
21 ft-lb |
Width |
: |
2-9/16 in |
- Recommended for steam service up to 450 deg F
- Replacement nuts and bolts are available
- Two gripping fingers and two clamps sections
- The bolts used in the boss interlocking clamps are not standard bolts
- They vary from standard bolts in their lengths, diameter, overall thread lengths and materials hardness
- These bolts can be retorqued, but it is not recommended to reuse the bolts or clamps, as they are designed for a single bend only
- Torque values for clamps are based on dry bolts
- The use of lubricant on bolts will adversely effect clamps performance
- Do not lubricate nuts and bolts
- Bolts in boss clamps are designed to bend as they are tightened and this allows the clamps to conform to the hose outside diameter
- Always tighten bolts to their specified torque values
- Periodic re-tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses
- Boss clamps are for single use only, once removed they are to be discarded
- Warning: this products contains a chemicals known to the State of California to caused birth defects or other reproductive harm
- Do not use in connections with drinking water
- Wash hands after handling
- Global investment cast carbon steel
-
Catalog
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dixon_B14_Catalog.pdf
-
Full Engineering Drawing
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dixon_BU9_Full_Engineering_Drawing.pdf
-
VIDEO LINK
http://www.youtube.com/watch?v=opJzyrWzvjw&list=PL10BD55ADAF8