Dixon® PPA50 Type A Cam and Groove Adapter, 3/4 x 1/2 in, Male Adapter x FNPT, Polypropylene

Dixon® Cam and Groove Adapter, Type A, Fitting/Connector Type: Adapter, 3/4 x 1/2 in Nominal Size, Male Adapter x FNPT, 1-5/8 in Length, 125 psi, Polypropylene, 1-1/4 in Dia

• Manufactured from a glass-filled polypropylene
• 1/2 in couplers and adapters will interchange with 3/4 in couplers and adapters, only the threads and barbs are 1/2 in
• 1-1/4 in couplers and adapters will interchange with 1-1/2 in couplers and adapters, only the threads and barbs are 1-1/4 in
• Polypropylene cam and groove should not be mixed with metal fittings
• Under no circumstances should cam and groove couplings be used for compressed air or steam service!
• Pressure rating is based on the seal of the mating part
• Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70 deg F with a standard seal installed
• Not recommended for use with PTFE gaskets
• 125 psi at ambient temperature 70 deg F pressure
• Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
• Do not use in connection with drinking water
• Wash hands after handling

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dixon_Valve_Coupling_TA774_Catalog.pdf