Gate Valve, 2-1/2 in Nominal, Solder End Style, 125 lb, Bronze Body, Handwheel Actuator

The NIBCO® bronze gate valve features a screw-in bonnet for service where infrequent maintenance is required. The solder ends allow for ease of installation. Non-rising stem gate valves are used when shutoff is required and a space saving is necessary. The solid wedge, integral seats and bi-directional service make the gate valve a good choice for a broad range of services. Please refer to NIBCO® technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® gate valves are backed by the NIBCO® 5-year 125 percent limited warranty.

NIBCO® Gate Valve, Series: S-113, 2-1/2 in Nominal, Solder End Style, 200 psi Pressure, 125 lb Pressure Class, Media: Air/Gas/Water, Handwheel Actuator, 4.13 in Inlet to Outlet Length, 8.41 in Top to Inlet Center, Bronze Body, Silicon Bronze Trim, Aramid Fiber/Graphite Softgoods, Domestic

• 125 psi/8.6 bar saturated steam to 353 deg F
• Use in U.S. drinking water applications is prohibited after January 3, 2014
• Dezincification resistant
• Screw-in bonnet
• Solid wedge
• Non-Rising stem
• Aramid fiber/graphite packing

• SDS https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Nibco_PX10504_SDS.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Nibco_NJ0J005_Specification_Sheet.pdf