Apollo™ LD-141-25-S-E-1-1 115276
  1. pin-int

Apollo™ Apollo™ Apollo International™ LD-141-25-S-E-1-1 LD141 Resilient Seated Lug Style Butterfly Valve, 2-1/2 in Nominal, Flanged End Style, 125/150 lb, Ductile Iron Body, EPDM Softgoods

Apollo™ Apollo™ Apollo International™ LD-141-25-S-E-1-1 LD141 Resilient Seated Lug Style Butterfly Valve, 2-1/2 in Nominal, Flanged End Style, 125/150 lb, Ductile Iron Body, EPDM Softgoods

  • Manufacturer: Apollo Conbraco
  • Brand Name: Apollo™
  • Part#: 115276
  • MPN: LD-141-25-S-E-1-1
  • UPC: 670750447228
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading
  • Branch Availability

Apollo International™ LD141 series ductile iron butterfly valves are ideal for use in industrial and commercial/HVAC/mechanical applications. The LD141 series is a companion lug style.

Apollo™ Apollo™ Apollo International™ Butterfly Valve, Resilient Seated Lug Style, Series: LD141, 2-1/2 in Nominal, Flanged End Style, 125/150 lb Pressure Class, -20 to 250 deg F Intermittent/225 deg F Continuous, 10-Position Handle Actuator, 8.13 in Top to Inlet Center, Ductile Iron Body, 316 Stainless Steel Disc, EPDM Softgoods

Actuator Type      :      10-Position Handle
Body Material      :      Ductile Iron
Disc Material      :      316 Stainless Steel
End Style      :      Flanged
Nominal Size      :      2-1/2 in
Pressure Class      :      125/150 lb
Series      :      LD141
Softgoods Material      :      EPDM
Temperature Rating      :      -20 to 250 deg F Intermittent/225 deg F Continuous
Top to Inlet Center      :      8.13 in
Type      :      Resilient Seated Lug Style
  • Compatible with ANSI 125 lb and 150 lb flanges
  • ISO 5211 top plate allows choice of Apollo™ pneumatic actuators and manual operators
  • LD141 series Suitable for end of line service (bidirectional dead end service) to rated pressure (2 to 12 in)
  • 3 to 24 in meet performance requirements of AWWA C-504
  • The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average
  • ASTM A276 type 416 stainless steel standard shaft
  • Buna-N stem seal and glass reinforced epoxy resin bushing
  • Black EPDM seat
  • Flange holes comply with ANSI class 125/150 dimensions
  • The face-to-face dimensions were designed to comply with MSS SP-67 and API 609
  • Through-shaft design with spline connection with stem to disc
  • Disc-to-seat interface provides bubble-tight shut-off with reduced torque and extended service life
  • Equipped with a stretch-resistant, non-collapsible, blow-out proof, phenolic-backed cartridge seat
  • Meets the intent and has passed AWWA C504-87 section 5 proof of design tests
  • Factory tested to 110% of full rated pressure in both directions before shipping
  • pdfCatalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Apollo_LD141-06-D-E-1-0_Catalog.pdf
  • pdfSpecification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Apollo_LD141-06-D-E-1-0_Specification_Sheet.pdf