Tylok® CS-Lok® SS-GP4-S4S4 GP Series General Purpose Ball Valve, 1/4 in Nominal, Tube End Style, Stainless Steel Body, PTFE Softgoods

GP Series Ball Valve is a true tube valve solution for tubing systems. It is available from 1/4 to 1 in with integral tube end connections for tube-to-tube, and from 1/4 in to 1/2 in with integral female pipe threads for female-to-female pipe applications. Tylok General Purpose Ball Valve Series is a moderate pressure ball valve for general service. They were designed for tight shut-off, long service life, and low operating torque.

Tylok® CS-Lok® Ball Valve, General Purpose, Series: GP Series, 1/4 in Nominal, Tube End Style, 2000 psi Pressure, 400 deg F, 0.2 in Orifice, 316 Stainless Steel Ball, 2.95 in Inlet to Outlet Length, 1.38 in Top to Inlet Center, Stainless Steel Body, 316 Stainless Steel Stem and TFM 1600 PTFE Seat Trim, PTFE Softgoods

• Built-in actuator mounting holes for ease of automation
• Bi-directional flow in fully open or fully closed position only
• Compact in size but with high flow capacity
• Locking handle in both On and Off position
• Blow-out proof stem
• 100% factory leak tested with nitrogen at 1000 psi and maximum allowable leak rate is 0.1 std cc/min
• 2000 psi at 100 deg F
• 3/4 in hex body
• Single ferrule
• PTFE gasket/stem packing

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Tylok_SSGP12D12D12_Specification_Sheet.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Tylok_SSGP12D12D12_Specification_Sheet.pdf