Victaulic® C030031PMC 31 Series Pipe Coupling, 3 in, Grooved, Ductile Iron

Pipe of AWWA dimensions can be joined quickly and easily with the Victaulic grooved piping method. Victaulic products and recommendations conform to ANSI/AWWA C-606, Standard for Grooved and Shouldered Type Joints and CSA 242 M1980. The groove configuration for ductile (cast) pipe includes a large radius, eliminating sharp corners and stress concentration. This provides stronger beam load capability and higher working pressures for radius grooved systems than available with conventional flanged systems.

Victaulic® Pipe Coupling, Series: 31 Series, Fitting/Connector Type: Coupling, 3 in Nominal, Grooved, 2.13 in Thickness, 500 psi, Ductile Iron, Alkyd Phenolic Primer, 3.96 in OD x 7.63 in W

• Provides a rigid or flexible joint on class 53 or higher pipe
• Ductile Iron with a minimum wall thickness of ANSI/AWWA C151/A21.51, Class 53
• Provides a fully restrained pipe joint to the published maximum allowable working pressure
• Joints are rigid or flexible depending on groove style
• Rigid joints resist axial and angular movement
• Flexible joints allow for restrained axial and angular movement to the couplings published capabilities
• With 316 stainless steel oval neck track bolts and nuts
• Grade "M" FlushSeal™ halogenated butyl gasket
• 500 psi working pressure

• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_G1200310L2_Specification_Sheet.pdf