Victaulic® C060031GM0 31 Series Pipe Coupling, 6 in, Grooved, Ductile Iron

Pipe of AWWA dimensions can be joined quickly and easily with the Victaulic grooved piping method. Victaulic products and recommendations conform to ANSI/AWWA C-606, Standard for Grooved and Shouldered Type Joints and CSA 242 M1980. The groove configuration for ductile (cast) pipe includes a large radius, eliminating sharp corners and stress concentration. This provides stronger beam load capability and higher working pressures for radius grooved systems than available with conventional flanged systems.

Victaulic® Pipe Coupling, Series: 31 Series, Fitting/Connector Type: Coupling, 6 in Nominal, Grooved, 2.22 in Thickness, 400 psi, Ductile Iron, Hot Dipped Galvanized, 6.9 in OD x 11.19 in W

• Provides a rigid or flexible joint on class 53 or higher pipe
• Ductile Iron with a minimum wall thickness of ANSI/AWWA C151/A21.51, Class 53
• Provides a fully restrained pipe joint to the published maximum allowable working pressure
• Joints are rigid or flexible depending on groove style
• Rigid joints resist axial and angular movement
• Flexible joints allow for restrained axial and angular movement to the couplings published capabilities
• With carbon steel oval neck track bolts and nuts
• Grade "M" FlushSeal™ halogenated butyl gasket
• 400 psi working pressure

• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_G1200310L2_Specification_Sheet.pdf