Victaulic® C060230X15 Non-Restrained Flexible Coupling, Carbon Steel, 6 in

Victaulic® Bolted Split-Sleeve Products (VBSP) Style 230 carbon steel couplings (formerly Depend-O-Lok ExE) provide a non-restrained, flexible pipe joint that satisfies the requirements set forth by the AWWA C227 Standard for Bolted, Split-Sleeve Restrained and Non-Restrained Couplings for Plain-End Pipe. This style of coupling is typically used in buried or exposed pipe applications for flexible field joint connections where either joint restraint due to thrust is not a requirement or can be accommodated using an external joint harness system such as AWWA M11 restraint harnesses. External restraints must be installed to ensure the coupling does not exceed published values for allowable movement. Typical applications include water and wastewater pipelines, inlet and drainage piping and other piping applications that require a non-restrained flexible connection. The coupling provides ease of installation and comes standard with an epoxy coating for protection against corrosion. The use of a heat-shrink sleeve or tape system can be used with minimal effort due to the low profile configuration.

Victaulic® Coupling, Non-Restrained Flexible, Series: 230, Fitting/Connector Type: Coupling, 6 in Nominal, 400 psi, Carbon Steel

• Non-restrained flexible pipe joint for water and wastewater pipelines
• Satisfies the requirements of AWWA C227

• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_C060230X15_Specification_Sheet.pdf