Victaulic® C300031GM0 31 Series Pipe Coupling, 30 in, Grooved

Pipe of AWWA dimensions can be joined quickly and easily with the Victaulic grooved piping method. Victaulic products and recommendations conform to ANSI/AWWA C-606, Standard for Grooved and Shouldered Type Joints and CSA 242 M1980. The groove configuration for ductile (cast) pipe includes a large radius, eliminating sharp corners and stress concentration. This provides stronger beam load capability and higher working pressures for radius grooved systems than available with conventional flanged systems.

Victaulic® Pipe Coupling, Series: 31 Series, Fitting/Connector Type: Coupling, 30 in Nominal, Grooved, 4.38 in Thickness, 150 psi, Ductile Iron, Hot Dipped Galvanized, 32 in OD x 39.39 in W

• Provides a rigid or flexible joint on class 53 or higher pipe
• Ductile Iron with a minimum wall thickness of ANSI/AWWA C151/A21.51, Class 53
• Provides a fully restrained pipe joint to the published maximum allowable working pressure
• Joints are rigid or flexible depending on groove style
• Rigid joints resist axial and angular movement
• Flexible joints allow for restrained axial and angular movement to the couplings published capabilities
• With carbon steel oval neck track bolts and nuts
• Grade "M" FlushSeal™ halogenated butyl gasket
• 150 psi working pressure

• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_G1200310L2_Specification_Sheet.pdf