Victaulic® Endseal™ L060070PT2 High Pressure Pipe Coupling, 6 in, Grooved End, Ductile Iron

Special groove profile for higher pressure services. ES gasket design has integral central leg that positions between the pipe ends for use with plastic-coated or cement-lined pipe. Working pressures shown are based on standard wall carbon steel pipe roll or cut grooved in accordance with Victaulic specifications.

Victaulic® Endseal™ Pipe Coupling, High Pressure, Series: HP-70ES, Fitting/Connector Type: Coupling, 6 in Nominal, Grooved, 12.61 in Length, 2000 psi, Ductile Iron, Black Enamel, 6.625 in OD x 2.38 in W

• Provides a rigid pipe joint designed to restrict axial or angular movement in high pressure rigid systems and/or plastic coated pipe
• Grade T nitrile gasket
• For use with plastic coated pipe
• Bolts/nuts: Electroplated, heat treated carbon steel, track-head type, conforming to physical properties of ASTM A-183, minimum tensile 110,000 psi/758340 kPa
• 7/8 x 5-1/2 in bolt/nut
• 2 No of bolts
• Note: HP-70ES couplings cannot be used with Victaulic Series 700 butterfly valves
• HP-70ES couplings must always be used with pipe grooved to Victaulic "ES" dimensions
• Metric thread size bolts are available (color coded gold) for all coupling sizes upon request
• Warning: For one time field test only, the maximum joint working pressure may be increased to 1-1/4 times
• Victaulic HP-70ES couplings may be used on Victaulic standard ductile iron cast fittings
• Heavy wall fittings must be used on all systems with operating pressures above 1000 psi (2 - 6 in) or 800 psi (8 -12 in)

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_NM18000026_Catalog.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_L020070PE2_Specification_Sheet.pdf