Victaulic® Vic-300 MasterSeal™ V030761XE3 761 Butterfly Valve, 3 in

These butterfly valves are designed for pressures ranging from vacuum to 300 psi/2065 kPa and for bi-directional, dead end services to full working pressure. Valve is provided with either 10-position handle, lever lock or gear operator.

Victaulic® Vic-300 MasterSeal™ Butterfly Valve, Series: 761, 3 in Nominal, Grooved, -30 to 250 deg F, Media: Water, Gear Actuator, 3.77 in Inlet to Outlet Length, 7.53 in Top to Inlet Center, Ductile Iron Body, Stainless Steel Disc, 416 Stainless Steel (Stem) Stem & Pin Material, Alkyd Enamel Coated, Black Oxide, 3.5 in OD x 9.88 in H

• Seat patented pressure enhanced rubber seat design
• Drive hub designed to accept nearly all types of actuation
• Stem seals prevents leakage of media
• Upper and lower stem bearings helps maintain constant low torque values for the life of the valve
• Stem blow-out proof design utilizing stainless steel
• Grooved end body reduces the weight of the valve and makes it easier to install
• Seal cartridge patented seal cartridge houses stem seals
• Thermal barrier reduces condensation on gear operators when installed in chilled water applications
• Body - Ductile iron conforming to ASTM A-536, grade 65-45-12
• End face, 2 to 6 in ductile iron conforming to ASTM A-536, grade 65-45-12
• Grade E green color code EPDM seat
• Designed for bi-directional, dead end services to full working pressure
• Carbon steel stem retaining ring
• Fiberglass or 316 stainless steel with TFE lining bearing
• Standard C36000 brass stem seal cartridge

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_NM18000026_Catalog.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_V020761BE2_Specification_Sheet.pdf