1. pin-int

Victaulic® Vic-300 MasterSeal™ W160761ST0 W761 Butterfly Valve, 16 in

Victaulic® Vic-300 MasterSeal™ W160761ST0 W761 Butterfly Valve, 16 in

  • Manufacturer: Victaulic
  • Brand Name: Victaulic®
  • Part#: W160761ST0
  • MPN: W160761ST0
  • UPC: 688304159725
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: loading

The Series W761 Advanced Groove System (AGS) butterfly valve is available with handwheel, gear operator, electric, pneumatic or hydraulic actuators. Installs in less than one-third the time of cumbersome multi-bolt wafer, lug type or flanged valves.

Victaulic® Vic-300 MasterSeal™ Butterfly Valve, Series: W761, 16 in Nominal, Grooved, -20 to 180 deg F, Media: Water, Bare Actuator, 10-1/2 in Inlet to Outlet Length, 17 in Top to Inlet Center, Ductile Iron Body, Ductile Iron Disc, 17-4PH Stainless Steel (Stem)/(Disc Driving Pin) Stem & Pin Material, Nitrile, Polyphenylene Sulfide Coated, Black Oxide, 16 in OD x 18 in W x 28 in H

Actuator Type      :      Bare
Body Material      :      Ductile Iron
Color      :      Black Oxide
Dimensions      :      16 in OD x 18 in W x 28 in H
Disc Material      :      Ductile Iron
End Style      :      Grooved
Finish      :      Polyphenylene Sulfide Coated
Inlet to Outlet Length      :      10-1/2 in
Media      :      Water
Nominal Size      :      16 in
Series      :      W761
Softgoods Material      :      Nitrile
Stem & Pin Material      :      17-4PH Stainless Steel (Stem)/(Disc Driving Pin)
Temperature Rating      :      -20 to 180 deg F
Top to Inlet Center      :      17 in
  • Offers an easily installed choice to cumbersome, multi-bolt wafer or lug-type flanged valves
  • 1/3 the weight of a flanged valve
  • UL classified in accordance with ANSI/NSF 61 for cold 86 deg F and hot 180 deg F potable water service
  • PPS coated seat, stainless steel age hardened 17-4 PH stem-upper/lower, reinforced PTFE bearing
  • Bronze thrust washer, 17-4 PH stainless steel disc driving pin
  • Steel cover plate, 304 stainless steel gasket retaining segment/seal retaining screw
  • EPDM (for standard), nitrile (for optional) stem seal/bottom cover plate O-ring
  • Recommended for cold and hot water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services
  • Not recommended for petroleum services
  • Grade T orange color code nitrile seat
  • Warning - Victaulic® AGS products use a patented groove profile that requires the use of special AGS rolls
  • AGS products must not be used on pipe that has been grooved using original grooving rolls
  • Nitrile O-ring
  • pdfCatalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_NM18000026_Catalog.pdf
  • pdfSpecification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Victaulic_W140761SE0_Specification_Sheet.pdf